Bring your creations to life

Some of our products

UCSi Badge light $20

Stand out in the crowd! Five programs to choose from and the speed is adjustable.

.

I spent many hours, creating the custom software that reduces the load on the battery, so you should easily get up to 24 hours of runtime from a good quality battery. (3 x 8-hour days at a show for example )


Comes with a battery, 8x1 Technics brick and coloured studs. Build it, add it to your badge and watch everyone around you go green with envy.



UCSi Pocket board $35

Small but mighty! This little board comes with six LEDs attached and is very easy to install. You have five programs to choose from and you can also adjust the flash speed. The holes are sized to take studs, so you can easily build it into your awesome creation. The LED wires are 15cm long.

Runs for up to 24 hr off a single coin-cell (included)


A simple, all-in-one solution.


Have a look at the Videos page to see what this little guy does in an emergency vehicle.

UCSi Ruler $5

Not just for fun. One side with popular SMD component footprints and a metric ruler.

On the other, stud measurements, brick heights and shaft and axle lengths. The holes fit standard stud bottoms, so you can even build on your ruler.


It also has a spot for your name to avoid it "disappearing"

UCSi Spinny Thingie $150

Give viewers a 360 degree view of your creation. Show them what is happening at the back of your buildings or quadruple your display area. Mesmerise them with the hypnotic movement.


I have tested this up to 50kg - that's a LOT of bricks. The speed is adjustable around 0.5rpm to 3rpm (1 rpm works best to ensure optimum viewing pleasure) It runs off a standard USB socket, so you can plug it into a phone charger. Or use a USB battery bank and avoid messy cabling.


Base for models not included - colours may vary.

PICchidna series - for the serious MOCer looking for a custom solution:

UCSi PICchidna LED $3.50 ea

The business end. These small LED boards are only 4mm x 4mm x 0.8mm, so the fit through small holes. The wires are 0.25mm in diameter and 30cm long (up to 50cm available for an additional fee)

The other end is a small 2-pin connector that plugs into any of the PICchidna boards.


Available in white, green, red, blue, yellow, amber, pink and UV/purple (ideal for those glow-in-the-dark fluoro parts!)

Micro controlled for up to 8 LEDs

UCSi PICchina Mini $20

Micro controlled outputs for up to 8 LEDs

I have written different programs, so contact me to discuss what I have available or to discuss what custom options we can look at.


Two power connectors - one in, one out - to daisy chain your PICchidna boards throughout your build. On-board regulator for 5V-12V supply. Power-on LED to ease fault-finding.


Power cables, battery boxes and LEDs sold separately.

PICchidna board $24

Double the fun! Essentially the same as the PICchidna MINI, but with two outputs on each channel. Ideal for bigger, more complex applications. (Like traffic lights or Ectos)


Two power connectors - one in, one out - to daisy chain your PICchidna boards throughout your build. On-board regulator for 5V-12V supply. Power-on LED to ease fault-finding.


Power cables, battery boxes and LEDs sold separately.

PICchidna Power board $16

Supply power to 8 LEDs in buildings or street lights. (No microprocessor)


Two power connectors - one in, one out - to daisy chain your PICchidna boards throughout your build. Or use the USB connection to connect to a phone charger or USB battery bank and use both power connections as outputs to power the rest of your creation. On-board regulator for 5V-12V supply. Power-on LED to ease fault-finding.


Power cables, battery boxes and LEDs sold separately.